Geothermal

JP Whitter are experts in Geothermal Borehole and waterwell drilling, following is a few of past projects.

Process Company Liverpool

Borehole drilled to a finished diameter 350mm depth 100m. 21day constant rate test pumping of the borehole using data loggers installed in off site sources also. Permanent pump installed and abstraction licence application.

Mrs Kauffman, Accrington

Drilling of a 150mm finished diameter borehole to a depth of 60m. Installation of permanent pumping equipment and pressure cylinder system.

Mr Payne Macclesfield

Borehole drilled to a finished diameter of 150mm to a depth of 60m. Installation of permanent pumping equipment and float switch in existing storage tank.

Mr Cowherd, Rawtenstall

Borehole drilled in 1988. Drilled 150mm diameter to a depth of 60m. After 20years use Mr Cowherd rang to ask if we could check the system, we did this recently and replaced the borehole pump and rising main only.

Mr Hamilton, Lancaster

Drilling of 150mm finished diameter borehole to a depth of 72m. Installation of permanent pumping equipment and pressure cylinder system to enable the water to be used as a mains water system.

Beaconsfield Farm, Hadnall, Shropshire

Borehole drilled to a finished diameter of 200mm, lined to 60m with 200mm diameter plain steel lining tubes. Permanent pumping equipment installed. Borehole to be used to supply the farm and caravan park.

Chester Obs Bhs

2no. observation boreholes drilled to 200mm diameter to depths of 160m each.

Beeston, Cheshire

Observation borehole drilled 200mm diameter to a depth of 230m. Installation of 250mm diameter plain steel lining tubes.